The beam has a fairly narrow focus and unlike a traditional blacklight, most of the light produced by the UV Photon is just outside the visible spectrum (370 nm). In full darkness it will cause objects to fluoresce at distances of 20 feet or more. In bright daylight the effectiveness is greatly reduced, but is still usable at about 6-12 inches.
Heavy duty 3/4'' plain black nylon loupe lanyard with a quick release buckle and a split ring. This lanyard may be used for any purpose but we've had it custom manufactured specifically for use with the BelOMO loupe.
Important: We offer this lanyard for no additional charge when you buy the combo package of the BelOMO loupe with attached lanyard. Attaching the lanyard requires a screw to be removed so let us do it. We've been doing it for years and you save money!
Use the split ring on loupes with a mounting hook. To use the lanyard with a BelOMO loupe remove one screw on the support shaft of your BelOMO loupe, swivel the frame out of the way and slide the end over the support shaft then install the screw again. Don't use the split ring to attach the lanyard to the loupe. (We suggest that you purchase the loupe with the lanyard already installed.)
Amateur Geologist is the sole licensed importer of the BelOMO loupes for North America.
These BelOMO 10x Triplet Loupe Magnifiers have a minor blemish and I won't sell them as new. They're just as good as new, there's never a problem with the lens and you save 20% more off our internet price.
About the seconds:
If a screw is stripped then you'll receive a replacement screw. Never have I had the threads in the shaft stripped but if it is I'll send you a replacement shaft.
Anyway, the optics of the loupe are always "as new" from the factory. The loupe case just has a minor blemish, the box is dirty, the screw slot has minor scuffs or something like that and I wont to sell it as new.
Limit one per customer.
Estwing's Cushion Grip drilling chisel. Foam cushion grip to reduce impact. Heavy duty wide Hard Cap minimizes chips from flying off the chisel head and provides a wider head to help protect the hands from missed blows. Even has a centering target! This Estwing rock chisel has a bull or pointed edge. The tip is square, 4 sided, with each side tapering to a point. The bull point chisel for drilling into rock. Use it to gain accuracy when trying to remove specimens from the country rock. Maximum design hammer head weight: 3 lbs.
The Raytech Tumble-Vibe 5 Vibratory Tumbler (Model TV-5) is economical and versatile.
Thousands of satisfied customers testify to the durability and simplicity of the Tumble-Vibe 5. Mated with a spare bowl, and a GSH-2 Stone finish Kit, the new TV-5 Starter Kit is a must for any beginner.
This new kit comes complete and ready to operate with a motorized base, two bowls, clear lid, 2 rubber nuts and all the grits necessary for accomplishing the grinding step through the final polish step of most gemstones. The (4) steps that are included are Silicone Carbide (100/1200) Silicon Carbide (700F), Iolox 50, Raybrite TL (GS-H2 Stone Finish Kit for hard rocks and minerals). There's enough grit for 8-15 pounds of stones. This new compact system will handle a myriad of applications. (Polished stones for illustration only. They are not included with this tumbler.)
Check out this article on Vibratory Tumblers
This popular low-cost unit is a favorite of the hobbyist and is used commercially as well. Vibrating rock tumblers process rocks 5 times faster than rotary rock tumblers. See results in days rather than weeks! This vibrating rock tumbler will process about four pounds of rock in it's .05 cu ft (3 pint) bowl. Bowl diameter is 8" and has a new convenient solid lid system. Shipping weight is 12 lbs., 1.05 cu. ft.
Sign in to post a review