JOBE 1/12" Mesh Stainless Steel Classifier


JOBE 1/12" Mesh Stainless Steel Classifier

  • JOBE 1/12" Mesh Stainless Steel Classifier


Details

SKU
HW-03006408
In stock
6 available
Weight
2.50 lbs
Retail Price
$23.95
Our Internet Price
$20.36 (Save 15%)

Options

Quantity
(from 1 to 6)


This quality stainless steel classifier has a rugged plastic body with a stainless steel screen. It is 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. It is easy to use and a must for proper fine gold recovery. Made in the USA
  • Customers Also Bought

  • Customer Reviews

  • Send to Friend

  • Gem Trails of Colorado

    This indispensable guide provides clear maps, concise directions, detailed text and B/W photos highlighting over 75 collecting sites. A section of color photos aid in identifying the rocks and minerals found at the end of the gem trail. 144 pgs.
    GB-38000203
    $7.46
  • Mineral Hardness Scale Ruler

    The Mineral Hardness Ruler is a stimulating visual aid, educates in one phase of mineralogy, and provides the standard ruler measurement scales needed in classes.


    Rockhounds, mineral enthusiasts, students, teachers, geologists, and any one interested in rocks and minerals will find the Mineral Hardness Ruler a handy visual aid for quick information on mineral hardness.



    The two-sided, flexible, glossy, vinyl ruler consists of five scales: three measurement scales and two mineral hardness scales. The measurement scales are in standard ruler measurements of tenths of inches, sixteenths of inches, and millimeters. Mohs' relative hardness numbers are integrated into the inch scales, while a separate scale exists for an absolute mineral hardness scale by Rosiwal.


    On one side of the ruler are pictures of the ten common minerals, in full color, selected by Mohs for his relative hardness scale. On the reverse side of the ruler are six common items with their relative hardnesses. These items, along with known minerals, can be used as a handy field kit to test the relative hardness of an unknown mineral.


    Hardness is one property of a mineral that can be used to distinguish among similar minerals. A given mineral can scratch any other mineral of the same or softer hardness. Over a hundred years ago, the German mineralogist Frederick Mohs devised the relative hardness scale that has found favor with mineralogists for over a century. Others, such as Rosiwal, formed absolute hardness scales using the same minerals as Mohs. For example, diamond, the hardest substance in Nature is not twice as hard as apatite, 10 versus 5, but over twenty thousand times as hard, 140,000 versus 6.5.

    FG-00000005
    $3.17
  • Lanyard, Plain Black, 3/4in Nylon, with Quick Release Buckle and Split Ring

    Lanyard, Plain Black, 3/4in Nylon, with Quick Release Buckle and Split Ring

    Heavy duty 3/4'' plain black nylon loupe lanyard with a quick release buckle and a split ring. This lanyard may be used for any purpose but we've had it custom manufactured specifically for use with the BelOMO loupe.

    Important: We offer this lanyard for no additional charge when you buy the combo package of the BelOMO loupe with attached lanyard. Attaching the lanyard requires a screw to be removed so let us do it. We've been doing it for years and you save money!

    Use the split ring on loupes with a mounting hook. To use the lanyard with a BelOMO loupe remove one screw on the support shaft of your BelOMO loupe, swivel the frame out of the way and slide the end over the support shaft then install the screw again. Don't use the split ring to attach the lanyard to the loupe. (We suggest that you purchase the loupe with the lanyard already installed.)

    HW-10000010
    $3.59
  • Pocket Pivot Magnet (Neodymium or Alinco)

    Use the handy Pocket Pivot Magnet as an aid in discovering and identifying magnetic and iron minerals and meteorites.

    Hold the Pocket Pivot Magnet vertically by the pivot clip and move the Pocket Pivot Magnet towards a suspected magnetic material. The Pocket Pivot Magnet will be pulled towards a meteorite or iron mineral or pulled toward or pushed away from a magnetic material such as magnetite.

    Features:
    • A powerful 1 inch long Alinco 5 magnet or a stronger Neodymium magnet
    • Stainless Steel Spring Wire Pivot Clip.
    • Adjustable pocket clip.
    • Weighs about a half an ounce.
    HW-00900001-N-Y
    $3.95
  • Federal Mining Claim Sign

    11 inches wide and 7 1/2 inches tall and makes it obvious that this is an active mining claim. States:

    FEDERAL MINING CLAIM

    This is a Federal Mining Claim - located, recorded, and
    maintained in accordance with 43 C.F.R Part 3800 and
    30 U.S.C. 22 et seg.; 43 U.S.C. 1744 and all appropriate
    state laws.
    All persons are warned that disturbance of the monu-
    menats, surface, or improvements on this claim or removal
    of minerals of any type without permission of the claim-
    ant, will result in their prosecution under the appropriate
    state and federal statues.

    Claim Name


    Claimant


    Address


    Federal Serial Number

     

    HW-03005866
    $4.21
  • JOBE 1/2" Mesh Stainless Steel Classifier

    This quality stainless steel classifier has a rugged plastic body with a stainless steel screen. It is 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. It is easy to use and a must for proper fine gold recovery. Made in the USA
    HW-03006402
    $20.36
  • JOBE 1/8" Mesh Stainless Steel Classifier

    This quality stainless steel classifier has a rugged plastic body with a stainless steel screen. It is 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. It is easy to use and a must for proper fine gold recovery. Made in the USA
    HW-03006406
    $20.36
  • JOBE 1/50" Mesh Stainless Steel Classifier

    This quality stainless steel classifier has a rugged plastic body with a stainless steel screen. It is 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. It is easy to use and a must for proper fine gold recovery. Made in the USA
    HW-03006414
    $20.36
  • JOBE 1/100" Mesh Stainless Steel Classifier

    This quality stainless steel classifier has a rugged plastic body with a stainless steel screen. It is 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. It is easy to use and a must for proper fine gold recovery. Made in the USA

    HW-03006416
    $20.36

Customer Reviews

There have been no reviews for this product.

  Sign in to post a review

: *
: *
: *
Type the characters you see in the picture:


*

Categories

Manufacturers